SCROLL DOWN PAGE for MORE
ADVANCED MACHINERY RESOURCES, INC.
USED CNC MACHINERY FOR SALE
Used Birmingham 3 AXIS CNC BedMill w/ Centroid M400
Birmingham CNC with Centroid Control 26,900.00
This is a super clean Birmingham Machine that came from a one man shop building construction fixtures. The machine features the Centroid M400 Controller known for ease of programming and powerful features. It has a 5 HP spindle motor with fully programmable spindle speeds, automatic power drawbar and 40 taper spindle. We offer this machine new from Atrump for $50,000.
Specifications:
Table Size 12" x 60"
Longitudinal Table Travel 41"
Cross Saddle Travel 20"
Vertical Head Travel 23"
Spindle Speeds (Variable) 130 - 4,200 RPM (Programmable)
Spindle Nose #40
Spindle Quill Travel 5"
Dimensions (L x W x H) 75" x 82" x 92"
Weight 6,500 Lbs.
Used Atrump AXIS CNC BedMill w/ New Centroid M400
Atrump B6FC with New Centroid Control 28,900.00
This Atrump B6FC Machine came from a research and development division of a large company. The machine is excellent shape and is fully supported by Atrump and Centroid. The machine features a new 2015 Centroid M400 Controller known for ease of programming and powerful features. It has all new 29 in/lb motor in X,Y and Z, and we installed new super precision duplex bearings in X and Y axes to achieve maximum tolerances. It has a 5 HP spindle motor with fully programmable spindle speeds, automatic power drawbar and 40 taper spindle. We offer this machine new from Atrump for $50,000.
Travels X 39 ", Y 22" , Z 23" Quill 6"
POWER 220V single or 3 PHASEFLOOR SPACE 124” x 73” x 98”
WEIGHT 6,200 Lbs.
Used Birmingham 3 AXIS CNC BedMill Centroid M400
Birmingham 3 AXIS CNC BedMill $18,900.00
SPECIAL PACKAGE INCLUDED WITH MACHINE PURCHASE !!!!!
Loading of the machine at Metro FREE
4 Hours with Marc Leonard Phone support or onsite in Washington / Northern Oregon
MACHINE SPECIFICATIONS
Table Size 10” x 54”
Travels X=30”, Y=18”, Z=19”
Quill Travel (manual) 5”
Spindle Motor 5 HP Taper 40 Taper
Speed Range 0-4000 RPM
Net Weight 6,500 lbs
Brochure Specifications Subject to Buyer Verification
Used Chevalier 4020 MB 3-AXIS New Centroid
This used milling machine is a really nice Heavy Duty Box Way Frame in immaculate condition. Save $30,000 off of new.
Used Chevalier 4020MB w/ Centroid $28,900
Includes
Centroid CNC Control
Chip pan
Flood coolant system
Auto lube
Features-
Rigid, honeycomb, ribbed, Meehanite casting Turcite B faced saddle way
Square type column and saddle ways
Automatic lube system with alarm and gauge
DC servo motors on all 3 axis
Hardened and ground table
Hard chrome quill and honed quill housing
Overall dimension 13" x 54"
T-Slots (3) T-Slot size 0.63" (16mm)
Longitudinal travel 40" Cross travel 20" Head travel 24"
Quill travel 5"
Spindle motor 5 HP Spindle nose taper NST 40
Spindle speeds (variable) 80 - 4000 rpm
Electrical supply 220/440 volts, 60 HZ, 3 phase
Floor area 87.8" x 74.8" Machine height 92.5"
Machine weight 6600 lbs
SCROLL DOWN for MORE
2004 MILLPORT RHINO IV
Used CNC BED MILL CENTROID
23,900.00 with Centroid CNC Control
2004 Millport Rhino IV Used CNC BED MILL ** Centroid M400 CNC Control ** TABLE SIZE---------------------------------- 50 X 12 Inch X AXIS TRAVEL----------------------------- 31.5 Inch Y AXIS TRAVEL----------------------------- 17 Inch Z AXIS TRAVEL----------------------------- 23 Inch SPINDLE MOTOR -------------------------- 5HP, 3 Phase, 230V TAPER------------------------------------------ #40 SPINDLE SPEED Max--------------------- 5000 Machine Weight------------------------------- 4400 lbs.
SCROLL DOWN for MORE
3 Axis HURCO Hawk 40 with Ultimax SSM Control
Used 3 Axis Hurco Hawk 40 $ 18,900.00
Hurco Hawk 40/SSM, 3-axis CNC Bed Mill. Table 58" x 13", Max work weight 990 LBS. Spindle motor 5HP. Drive: 2-SPEED BACK GEARED, 80-3800 RPM. Nose to Table MIN/MAX 3.54"/23.6", Center to Column Ways 20", Quill DIA 4.33". Travels:(X)40" x (Y)20" x (Z)20", Quill Travel 6". Programmable Feedrates 250 IPM. Hardened and Ground Y/Z-Axis Ways, Auto Lube. Programmable Spindle speeds, Power Drawbar, Flood coolant. ULTIMAX SSM 3- Axis CNC Year New: 1998 Machine Condition: Used Short Description: Hurco Hawk 40/SSM, 3-axis CNC bed mill. Voltage: 230 Horse Power: 5 40 Taper Spindle RPM: 3800 Controls: Hurco Ultimax SSM Machine Size (LxWxH): 65"x60"x88" Machine Weight: 5500 Size of Worktable: 58 x 13
** These Specifications Subject to Buyer Verification
Used Equipment Sold "As is Where Is |
|
Atrump B5FC 3 Axis CNC BedMill w/ Heidenhain
Used 3 Axis CNC BedMill $ 17,900.00
WORK TABLE 11” X 52”
TRAVELS-X-AXIS 31” TRAVELS-Y-AXIS 16” TRAVEL Z-AXIS 20”
SPINDLE HEAD:
SPINDLE MOTOR 5 HP SPINDLE TAPER 40 Taper POWER 220V 3 PHASE
ALSO INCLUDES
QTY 8 40 Taper High Quality Tool Holders from AMR Stock
One All Matic 5” CNC Vise from AMR Stock
ADVANCED MACHINERY RESOURCES, INC.
VANCOUVER, WA.
(503) 998-0982
Email: Jerry@cncbyamr.com